Asterisk dialplan functions

From 탱이의 잡동사니
Jump to: navigation, search

Overview

Asterisk dialplan function 내용 정리

AES_DECRYPT

Decrypt a string encoded in base64 with AES given a 16 character key.

Returns the plain text string.

AES_DECRYPT(key,string)
  • key : AES key.
  • string : Input string.

See also

AES_ENCRYPT

Encrypt a string with AES given a 16 character key.

Return an AES encrypted string encoded in base64.

AES_ENCRYPT(key,string)
  • key : AES key.
  • string : Input string.

See also

AGC

Apply automatic gain control to audio on a channel.

The AGC function will apply automatic gain control to the audio on the channel that it is executed on. Using rx for audio received and tx for audio transmitted to the channel. When using this function you set a target audio level. It is primarily intended for use with analog lines, but could be useful for other channels as well. The target volume is set with a number between 1 - 32768. The larger the number the louder(more gain) the channel will receive.

AGC(channeldirection)
  • channeldirection : this can be either rx or tx.

Example

exten => 1,1,Set(AGC(rx)=8000)
exten => 1,2,Set(AGC(tx)=off)

See also

AGENT

Gets information about an Agent.

AGENT(AgentId:item)
  • AgentId
  • item : The valid items to retrieve are:
status : (default) The status of the agent (LOGGEDIN | LOGGEDOUT)
password : Deprecated. The dialplan handles any agent authentication.
name : The name of the agent.
mohclass : MusicOnHold class.
channel : The name of the active channel for the Agent(AgentLogin).
fullchannel : The untruncated name of the active channel for the Agent(AgentLogin).

See also

GROUP

Gets or sets the channel group.

Category can be employed for more fine grained group management. Each channel can only be member of exactly one group per category.

GROUP(category)
  • category : Category name.

Example

[CountOutgoingCalls]
 exten => s,1,Set(GROUP(active_calls)=active_calls)
  same => n,GotoIf($[${GROUP_COUNT(active_calls)}>${OutgoingCallLines}]?FraudHandler,s-668,1) ; Too many concurrent calls (outbound only).
  same => n,Return()

See also

GROUP_COUNT

Counts the number of channels in the specified group.

Calculates the group count for the specified group, or uses the channel's current group if not specified (and non-empty).

GROUP_COUNT(groupname@category)
  • groupname : Group name.
  • category : Category name.

Example

[CountOutgoingCalls]
 exten => s,1,Set(GROUP(active_calls)=active_calls)
  same => n,GotoIf($[${GROUP_COUNT(active_calls)}>${OutgoingCallLines}]?FraudHandler,s-668,1) ; Too many concurrent calls (outbound only).
  same => n,Return()

See also

GROUP_LIST

Gets a list of the groups set on a channel.

GROUP_LIST()

See also

GROUP_MATCH_COUNT

Counts the number of channles in the groups matching the specified pattern.

Calculates the group count for all groups that match the specified pattern. Note: category matching is applied after matching based on group. Uses standard regular expression matching on both.

GROUP_MATCH_COUNT(groupmatch@category)
  • groupmatch : A standard regular expression used to match a group name.
  • category : A standard regular expression used to match a category name.

See also

IMPORT

Retrieve the value of a variable from another channel.

IMPORT(channel,variable)
  • channel
  • variable

Example

[TransferFromMVNO]

exten => _[+*0-9a-zA-Z]!,2,NoOp(Transfer from MVNO)
  same => n,Set(__InternalNumber=${IMPORT(${SHARED(TransferChennel)},InternalNumber)})
  ...

See also

SHARED

Gets or sets the shared variable specified.

Implements a shared variable area, in which you may share variables between channels.

The variables used in this space are separate from the general namespace of the channel and thus SHARED(foo) and foo represent two completely different variables, despite sharing the same name.

Finally, realize that there is an inherent race between channels operating at the same time, fiding with each others internal variables, which is why this special variable namespace exists; it is to remind you that variables in the SHARED namespace may change at any time, without warning. You should therefore take special care to ensure that when using the SHARED namespace, you retrieve the variable and store it in a regular channel variable before using it in a set of calculations(or you might be surprised by the result).

SHARED(varname,channel)
  • varname : Variable name
  • channel : If not specified will default to current channel. It is the complete channel name: SIP/12-abcd1234 or the prefix only SIP/12.

Example

[SetSharedVariables]
exten => s,1,NoOp(Set shared variables)
  same => n,Set(SHARED(DirectNumber)=${DirectNumber})
  same => n,Set(SHARED(InternalNumber)=${DirectNumber})
  ...

See also

VALID_EXTEN

입력된 Extension 이 지정된 Context 에 존재하는지 여부를 확인한다.

Determine whether an extension exists or not.

Returns a true value if the indicated context, extension, and priority exist.

This function has been deprecated in favor of the DIALPLAN_EXISTS() function.
VALID_EXTEN(context,extension,priority)
  • context : Defaults to the current context.
  • extension
  • priority : Priority defaults to 1

Example

[DialToInternal]
 include => Internal
 exten => s,1,Goto(${CallFlowID},1)
 exten => _[+0-9]!,1,GoSub(LoopDetection,s,1)
  same => n,ExecIf(${ISNULL(${UniqueID})}?Set(__UniqueID=${UNIQUEID}))
  same => n,Log(NOTICE,${UniqueID}-${CONTEXT}(${UNIQUEID}@${CHANNEL}))
  same => n,GotoIf(${VALID_EXTEN(Internal,${EXTEN},1)}?Internal,${EXTEN},1)

See also

See also