Asterisk status code: Difference between revisions

From 탱이의 잡동사니
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 69: Line 69:
#define AST_CAUSE_NOSUCHDRIVER  AST_CAUSE_CHAN_NOT_IMPLEMENTED
#define AST_CAUSE_NOSUCHDRIVER  AST_CAUSE_CHAN_NOT_IMPLEMENTED
</source>
</source>
== Originate response reason ==
Originate Response AMI Event 에는 Result 사유에 대한 Reason 코드를 설정하도록 되어 있다.
Reason code 내용은 다음과 같다(asterisk/frame.h).
<pre>
AST_CONTROL_HANGUP = 1, /*!< Other end has hungup */
AST_CONTROL_RING = 2, /*!< Local ring */
AST_CONTROL_RINGING = 3, /*!< Remote end is ringing */
AST_CONTROL_ANSWER = 4, /*!< Remote end has answered */
AST_CONTROL_BUSY = 5, /*!< Remote end is busy */
AST_CONTROL_TAKEOFFHOOK = 6, /*!< Make it go off hook */
AST_CONTROL_OFFHOOK = 7, /*!< Line is off hook */
AST_CONTROL_CONGESTION = 8, /*!< Congestion (circuits busy) */
AST_CONTROL_FLASH = 9, /*!< Flash hook */
AST_CONTROL_WINK = 10, /*!< Wink */
AST_CONTROL_OPTION = 11, /*!< Set a low-level option */
AST_CONTROL_RADIO_KEY = 12, /*!< Key Radio */
AST_CONTROL_RADIO_UNKEY = 13, /*!< Un-Key Radio */
AST_CONTROL_PROGRESS = 14, /*!< Indicate PROGRESS */
AST_CONTROL_PROCEEDING = 15, /*!< Indicate CALL PROCEEDING */
AST_CONTROL_HOLD = 16, /*!< Indicate call is placed on hold */
AST_CONTROL_UNHOLD = 17, /*!< Indicate call is left from hold */
AST_CONTROL_VIDUPDATE = 18, /*!< Indicate video frame update */
_XXX_AST_CONTROL_T38 = 19, /*!< T38 state change request/notification \deprecated This is no longer supported. Use AST_CONTROL_T38_PARAMETERS instead. */
AST_CONTROL_SRCUPDATE = 20, /*!< Indicate source of media has changed */
AST_CONTROL_TRANSFER = 21, /*!< Indicate status of a transfer request */
AST_CONTROL_CONNECTED_LINE = 22,/*!< Indicate connected line has changed */
AST_CONTROL_REDIRECTING = 23, /*!< Indicate redirecting id has changed */
AST_CONTROL_T38_PARAMETERS = 24,/*!< T38 state change request/notification with parameters */
AST_CONTROL_CC = 25, /*!< Indication that Call completion service is possible */
AST_CONTROL_SRCCHANGE = 26, /*!< Media source has changed and requires a new RTP SSRC */
AST_CONTROL_READ_ACTION = 27, /*!< Tell ast_read to take a specific action */
AST_CONTROL_AOC = 28, /*!< Advice of Charge with encoded generic AOC payload */
AST_CONTROL_END_OF_Q = 29, /*!< Indicate that this position was the end of the channel queue for a softhangup. */
AST_CONTROL_INCOMPLETE = 30, /*!< Indication that the extension dialed is incomplete */
AST_CONTROL_MCID = 31, /*!< Indicate that the caller is being malicious. */
AST_CONTROL_UPDATE_RTP_PEER = 32, /*!< Interrupt the bridge and have it update the peer */
AST_CONTROL_PVT_CAUSE_CODE = 33, /*!< Contains an update to the protocol-specific cause-code stored for branching dials */
AST_CONTROL_MASQUERADE_NOTIFY = 34, /*!< A masquerade is about to begin/end. (Never sent as a frame but directly with ast_indicate_data().) */
/*
  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
  *
  * IAX2 sends these values out over the wire.  To prevent future
  * incompatibilities, pick the next value in the enum from whatever
  * is on the current trunk.  If you lose the merge race you need to
  * fix the previous branches to match what is on trunk.  In addition
  * you need to change chan_iax2 to explicitly allow the control
  * frame over the wire if it makes sense for the frame to be passed
  * to another Asterisk instance.
  *
  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
  */
/* Control frames used to manipulate a stream on a channel. The values for these
  * must be greater than the allowed value for a 8-bit char, so that they avoid
  * conflicts with DTMF values. */
AST_CONTROL_STREAM_STOP = 1000, /*!< Indicate to a channel in playback to stop the stream */
AST_CONTROL_STREAM_SUSPEND = 1001, /*!< Indicate to a channel in playback to suspend the stream */
AST_CONTROL_STREAM_RESTART = 1002, /*!< Indicate to a channel in playback to restart the stream */
AST_CONTROL_STREAM_REVERSE = 1003, /*!< Indicate to a channel in playback to rewind */
AST_CONTROL_STREAM_FORWARD = 1004, /*!< Indicate to a channel in playback to fast forward */
/* Control frames to manipulate recording on a channel. */
AST_CONTROL_RECORD_CANCEL = 1100, /*!< Indicated to a channel in record to stop recording and discard the file */
AST_CONTROL_RECORD_STOP = 1101, /*!< Indicated to a channel in record to stop recording */
AST_CONTROL_RECORD_SUSPEND = 1102, /*!< Indicated to a channel in record to suspend/unsuspend recording */
AST_CONTROL_RECORD_MUTE = 1103, /*!< Indicated to a channel in record to mute/unmute (i.e. write silence) recording */
</pre>


== Channel status ==
== Channel status ==
Line 120: Line 189:
Asterisk 에서 관리되는 모든 디바이스(Device)들은 다음 중 하나의 상태를 가진다.
Asterisk 에서 관리되는 모든 디바이스(Device)들은 다음 중 하나의 상태를 가진다.


* '''상태 코드 정의'''
=== status define ===
0부터 시작한다.
0부터 시작한다.
<source lang=c>
<source lang=c>
Line 140: Line 209:
AST_DEVICE_TOTAL,        /*!< Total num of device states, used for testing */
AST_DEVICE_TOTAL,        /*!< Total num of device states, used for testing */
};
};
</source>
</source>


Line 148: Line 216:
채널이 Hangup 된 사유를 나타낸다.
채널이 Hangup 된 사유를 나타낸다.
<pre>
<pre>
include/asterisk/causes.h
#define AST_CAUSE_UNALLOCATED                    1
#define AST_CAUSE_UNALLOCATED                    1
#define AST_CAUSE_NO_ROUTE_TRANSIT_NET          2
#define AST_CAUSE_NO_ROUTE_TRANSIT_NET          2

Latest revision as of 10:00, 9 February 2017

Overview

Asterisk code 정리.

Originate result

원문은 이곳<ref>https://wiki.asterisk.org/wiki/display/AST/Hangup+Cause+Mappings</ref>에서 확인할 수 있다.

Originate 를 하게 되면(cli: Dial()) Originate 에 대한 결과를 받아오게 된다. 성공, 혹은 실패. 그리고 실패에 대해서는 왜 실패했는지에 대한 사유가 있다.

<source lang=c>

  1. define AST_CAUSE_UNALLOCATED 1
  2. define AST_CAUSE_NO_ROUTE_TRANSIT_NET 2
  3. define AST_CAUSE_NO_ROUTE_DESTINATION 3
  4. define AST_CAUSE_MISDIALLED_TRUNK_PREFIX 5
  5. define AST_CAUSE_CHANNEL_UNACCEPTABLE 6
  6. define AST_CAUSE_CALL_AWARDED_DELIVERED 7
  7. define AST_CAUSE_PRE_EMPTED 8
  8. define AST_CAUSE_NUMBER_PORTED_NOT_HERE 14
  9. define AST_CAUSE_NORMAL_CLEARING 16
  10. define AST_CAUSE_USER_BUSY 17
  11. define AST_CAUSE_NO_USER_RESPONSE 18
  12. define AST_CAUSE_NO_ANSWER 19
  13. define AST_CAUSE_SUBSCRIBER_ABSENT 20
  14. define AST_CAUSE_CALL_REJECTED 21
  15. define AST_CAUSE_NUMBER_CHANGED 22
  16. define AST_CAUSE_REDIRECTED_TO_NEW_DESTINATION 23
  17. define AST_CAUSE_ANSWERED_ELSEWHERE 26
  18. define AST_CAUSE_DESTINATION_OUT_OF_ORDER 27
  19. define AST_CAUSE_INVALID_NUMBER_FORMAT 28
  20. define AST_CAUSE_FACILITY_REJECTED 29
  21. define AST_CAUSE_RESPONSE_TO_STATUS_ENQUIRY 30
  22. define AST_CAUSE_NORMAL_UNSPECIFIED 31
  23. define AST_CAUSE_NORMAL_CIRCUIT_CONGESTION 34
  24. define AST_CAUSE_NETWORK_OUT_OF_ORDER 38
  25. define AST_CAUSE_NORMAL_TEMPORARY_FAILURE 41
  26. define AST_CAUSE_SWITCH_CONGESTION 42
  27. define AST_CAUSE_ACCESS_INFO_DISCARDED 43
  28. define AST_CAUSE_REQUESTED_CHAN_UNAVAIL 44
  29. define AST_CAUSE_FACILITY_NOT_SUBSCRIBED 50
  30. define AST_CAUSE_OUTGOING_CALL_BARRED 52
  31. define AST_CAUSE_INCOMING_CALL_BARRED 54
  32. define AST_CAUSE_BEARERCAPABILITY_NOTAUTH 57
  33. define AST_CAUSE_BEARERCAPABILITY_NOTAVAIL 58
  34. define AST_CAUSE_BEARERCAPABILITY_NOTIMPL 65
  35. define AST_CAUSE_CHAN_NOT_IMPLEMENTED 66
  36. define AST_CAUSE_FACILITY_NOT_IMPLEMENTED 69
  37. define AST_CAUSE_INVALID_CALL_REFERENCE 81
  38. define AST_CAUSE_INCOMPATIBLE_DESTINATION 88
  39. define AST_CAUSE_INVALID_MSG_UNSPECIFIED 95
  40. define AST_CAUSE_MANDATORY_IE_MISSING 96
  41. define AST_CAUSE_MESSAGE_TYPE_NONEXIST 97
  42. define AST_CAUSE_WRONG_MESSAGE 98
  43. define AST_CAUSE_IE_NONEXIST 99
  44. define AST_CAUSE_INVALID_IE_CONTENTS 100
  45. define AST_CAUSE_WRONG_CALL_STATE 101
  46. define AST_CAUSE_RECOVERY_ON_TIMER_EXPIRE 102
  47. define AST_CAUSE_MANDATORY_IE_LENGTH_ERROR 103
  48. define AST_CAUSE_PROTOCOL_ERROR 111
  49. define AST_CAUSE_INTERWORKING 127

/* Special Asterisk aliases */

  1. define AST_CAUSE_BUSY AST_CAUSE_USER_BUSY
  2. define AST_CAUSE_FAILURE AST_CAUSE_NETWORK_OUT_OF_ORDER
  3. define AST_CAUSE_NORMAL AST_CAUSE_NORMAL_CLEARING
  4. define AST_CAUSE_NOANSWER AST_CAUSE_NO_ANSWER
  5. define AST_CAUSE_CONGESTION AST_CAUSE_NORMAL_CIRCUIT_CONGESTION
  6. define AST_CAUSE_UNREGISTERED AST_CAUSE_SUBSCRIBER_ABSENT
  7. define AST_CAUSE_NOTDEFINED 0
  8. define AST_CAUSE_NOSUCHDRIVER AST_CAUSE_CHAN_NOT_IMPLEMENTED

</source>

Originate response reason

Originate Response AMI Event 에는 Result 사유에 대한 Reason 코드를 설정하도록 되어 있다.

Reason code 내용은 다음과 같다(asterisk/frame.h).

AST_CONTROL_HANGUP = 1,			/*!< Other end has hungup */
AST_CONTROL_RING = 2,			/*!< Local ring */
AST_CONTROL_RINGING = 3,		/*!< Remote end is ringing */
AST_CONTROL_ANSWER = 4,			/*!< Remote end has answered */
AST_CONTROL_BUSY = 5,			/*!< Remote end is busy */
AST_CONTROL_TAKEOFFHOOK = 6,	/*!< Make it go off hook */
AST_CONTROL_OFFHOOK = 7,		/*!< Line is off hook */
AST_CONTROL_CONGESTION = 8,		/*!< Congestion (circuits busy) */
AST_CONTROL_FLASH = 9,			/*!< Flash hook */
AST_CONTROL_WINK = 10,			/*!< Wink */
AST_CONTROL_OPTION = 11,		/*!< Set a low-level option */
AST_CONTROL_RADIO_KEY = 12,		/*!< Key Radio */
AST_CONTROL_RADIO_UNKEY = 13,	/*!< Un-Key Radio */
AST_CONTROL_PROGRESS = 14,		/*!< Indicate PROGRESS */
AST_CONTROL_PROCEEDING = 15,	/*!< Indicate CALL PROCEEDING */
AST_CONTROL_HOLD = 16,			/*!< Indicate call is placed on hold */
AST_CONTROL_UNHOLD = 17,		/*!< Indicate call is left from hold */
AST_CONTROL_VIDUPDATE = 18,		/*!< Indicate video frame update */
_XXX_AST_CONTROL_T38 = 19,		/*!< T38 state change request/notification \deprecated This is no longer supported. Use AST_CONTROL_T38_PARAMETERS instead. */
AST_CONTROL_SRCUPDATE = 20,		/*!< Indicate source of media has changed */
AST_CONTROL_TRANSFER = 21,		/*!< Indicate status of a transfer request */
AST_CONTROL_CONNECTED_LINE = 22,/*!< Indicate connected line has changed */
AST_CONTROL_REDIRECTING = 23,	/*!< Indicate redirecting id has changed */
AST_CONTROL_T38_PARAMETERS = 24,/*!< T38 state change request/notification with parameters */
AST_CONTROL_CC = 25,			/*!< Indication that Call completion service is possible */
AST_CONTROL_SRCCHANGE = 26,		/*!< Media source has changed and requires a new RTP SSRC */
AST_CONTROL_READ_ACTION = 27,	/*!< Tell ast_read to take a specific action */
AST_CONTROL_AOC = 28,			/*!< Advice of Charge with encoded generic AOC payload */
AST_CONTROL_END_OF_Q = 29,		/*!< Indicate that this position was the end of the channel queue for a softhangup. */
AST_CONTROL_INCOMPLETE = 30,	/*!< Indication that the extension dialed is incomplete */
AST_CONTROL_MCID = 31,			/*!< Indicate that the caller is being malicious. */
AST_CONTROL_UPDATE_RTP_PEER = 32, /*!< Interrupt the bridge and have it update the peer */
AST_CONTROL_PVT_CAUSE_CODE = 33, /*!< Contains an update to the protocol-specific cause-code stored for branching dials */
AST_CONTROL_MASQUERADE_NOTIFY = 34,	/*!< A masquerade is about to begin/end. (Never sent as a frame but directly with ast_indicate_data().) */

/*
  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
  *
  * IAX2 sends these values out over the wire.  To prevent future
  * incompatibilities, pick the next value in the enum from whatever
  * is on the current trunk.  If you lose the merge race you need to
  * fix the previous branches to match what is on trunk.  In addition
  * you need to change chan_iax2 to explicitly allow the control
  * frame over the wire if it makes sense for the frame to be passed
  * to another Asterisk instance.
  *
  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
  */

/* Control frames used to manipulate a stream on a channel. The values for these
  * must be greater than the allowed value for a 8-bit char, so that they avoid
  * conflicts with DTMF values. */
AST_CONTROL_STREAM_STOP = 1000,		/*!< Indicate to a channel in playback to stop the stream */
AST_CONTROL_STREAM_SUSPEND = 1001,	/*!< Indicate to a channel in playback to suspend the stream */
AST_CONTROL_STREAM_RESTART = 1002,	/*!< Indicate to a channel in playback to restart the stream */
AST_CONTROL_STREAM_REVERSE = 1003,	/*!< Indicate to a channel in playback to rewind */
AST_CONTROL_STREAM_FORWARD = 1004,	/*!< Indicate to a channel in playback to fast forward */
/* Control frames to manipulate recording on a channel. */
AST_CONTROL_RECORD_CANCEL = 1100,	/*!< Indicated to a channel in record to stop recording and discard the file */
AST_CONTROL_RECORD_STOP = 1101,	/*!< Indicated to a channel in record to stop recording */
AST_CONTROL_RECORD_SUSPEND = 1102,	/*!< Indicated to a channel in record to suspend/unsuspend recording */
AST_CONTROL_RECORD_MUTE = 1103,	/*!< Indicated to a channel in record to mute/unmute (i.e. write silence) recording */

Channel status

Asterisk 에서 관리되는 모든 채널들은 다음 중 하나의 상태를 가진다.

  • 상태 코드 정의

0부터 시작한다. <source lang=c> /*!

* \brief ast_channel states
*
* \note Bits 0-15 of state are reserved for the state (up/down) of the line
*       Bits 16-32 of state are reserved for flags
*/

enum ast_channel_state {

   AST_STATE_DOWN,             /*!< Channel is down and available */
   AST_STATE_RESERVED,         /*!< Channel is down, but reserved */
   AST_STATE_OFFHOOK,          /*!< Channel is off hook */
   AST_STATE_DIALING,          /*!< Digits (or equivalent) have been dialed */
   AST_STATE_RING,             /*!< Line is ringing */
   AST_STATE_RINGING,          /*!< Remote end is ringing */
   AST_STATE_UP,               /*!< Line is up */
   AST_STATE_BUSY,             /*!< Line is busy */
   AST_STATE_DIALING_OFFHOOK,  /*!< Digits (or equivalent) have been dialed while offhook */
   AST_STATE_PRERING,          /*!< Channel has detected an incoming call and is waiting for ring */
   AST_STATE_MUTE = (1 << 16), /*!< Do not transmit voice data */

}; </source>

  • 매뉴얼

원문은 이곳<ref>https://wiki.asterisk.org/wiki/display/AST/Asterisk+13+ManagerEvent_Newstate</ref>에서 확인할 수 있다.

Newstate 이벤트 메시지에 정의된 상태 코드를 가져왔다. 코드 번호와 내용은 위와 동일하다. 하지만 StateDesc로 표시되는 문자열 내용이 아래와 같이 설정된다. 원문은 이곳<ref>https://wiki.asterisk.org/wiki/display/AST/Asterisk+13+ManagerEvent_Newstate</ref>에서 확인할 수 있다.

Down
Rsrvd
OffHook
Dialing
Ring
Ringing
Up
Busy
Dialing Offhook
Pre-ring
Unknown

Device status

Asterisk 에서 관리되는 모든 디바이스(Device)들은 다음 중 하나의 상태를 가진다.

status define

0부터 시작한다. <source lang=c> /*! \brief Device States

*  \note The order of these states may not change because they are included
*        in Asterisk events which may be transmitted across the network to
*        other servers.
*/

enum ast_device_state { AST_DEVICE_UNKNOWN, /*!< Device is valid but channel didn't know state */ AST_DEVICE_NOT_INUSE, /*!< Device is not used */ AST_DEVICE_INUSE, /*!< Device is in use */ AST_DEVICE_BUSY, /*!< Device is busy */ AST_DEVICE_INVALID, /*!< Device is invalid */ AST_DEVICE_UNAVAILABLE, /*!< Device is unavailable */ AST_DEVICE_RINGING, /*!< Device is ringing */ AST_DEVICE_RINGINUSE, /*!< Device is ringing *and* in use */ AST_DEVICE_ONHOLD, /*!< Device is on hold */ AST_DEVICE_TOTAL, /*!< Total num of device states, used for testing */ }; </source>

Hangup code

Hangup 시, 사용되는 상태 코드 정리.

채널이 Hangup 된 사유를 나타낸다.

include/asterisk/causes.h

#define AST_CAUSE_UNALLOCATED                    1
#define AST_CAUSE_NO_ROUTE_TRANSIT_NET           2
#define AST_CAUSE_NO_ROUTE_DESTINATION           3
#define AST_CAUSE_MISDIALLED_TRUNK_PREFIX        5
#define AST_CAUSE_CHANNEL_UNACCEPTABLE           6
#define AST_CAUSE_CALL_AWARDED_DELIVERED         7
#define AST_CAUSE_PRE_EMPTED                     8
#define AST_CAUSE_NUMBER_PORTED_NOT_HERE        14
#define AST_CAUSE_NORMAL_CLEARING               16
#define AST_CAUSE_USER_BUSY                     17
#define AST_CAUSE_NO_USER_RESPONSE              18
#define AST_CAUSE_NO_ANSWER                     19
#define AST_CAUSE_SUBSCRIBER_ABSENT             20
#define AST_CAUSE_CALL_REJECTED                 21
#define AST_CAUSE_NUMBER_CHANGED                22
#define AST_CAUSE_REDIRECTED_TO_NEW_DESTINATION 23
#define AST_CAUSE_ANSWERED_ELSEWHERE            26
#define AST_CAUSE_DESTINATION_OUT_OF_ORDER      27
#define AST_CAUSE_INVALID_NUMBER_FORMAT         28
#define AST_CAUSE_FACILITY_REJECTED             29
#define AST_CAUSE_RESPONSE_TO_STATUS_ENQUIRY    30
#define AST_CAUSE_NORMAL_UNSPECIFIED            31
#define AST_CAUSE_NORMAL_CIRCUIT_CONGESTION     34
#define AST_CAUSE_NETWORK_OUT_OF_ORDER          38
#define AST_CAUSE_NORMAL_TEMPORARY_FAILURE      41
#define AST_CAUSE_SWITCH_CONGESTION             42
#define AST_CAUSE_ACCESS_INFO_DISCARDED         43
#define AST_CAUSE_REQUESTED_CHAN_UNAVAIL        44
#define AST_CAUSE_FACILITY_NOT_SUBSCRIBED       50
#define AST_CAUSE_OUTGOING_CALL_BARRED          52
#define AST_CAUSE_INCOMING_CALL_BARRED          54
#define AST_CAUSE_BEARERCAPABILITY_NOTAUTH      57
#define AST_CAUSE_BEARERCAPABILITY_NOTAVAIL     58
#define AST_CAUSE_BEARERCAPABILITY_NOTIMPL      65
#define AST_CAUSE_CHAN_NOT_IMPLEMENTED          66
#define AST_CAUSE_FACILITY_NOT_IMPLEMENTED      69
#define AST_CAUSE_INVALID_CALL_REFERENCE        81
#define AST_CAUSE_INCOMPATIBLE_DESTINATION      88
#define AST_CAUSE_INVALID_MSG_UNSPECIFIED       95
#define AST_CAUSE_MANDATORY_IE_MISSING          96
#define AST_CAUSE_MESSAGE_TYPE_NONEXIST         97
#define AST_CAUSE_WRONG_MESSAGE                 98
#define AST_CAUSE_IE_NONEXIST                   99
#define AST_CAUSE_INVALID_IE_CONTENTS          100
#define AST_CAUSE_WRONG_CALL_STATE             101
#define AST_CAUSE_RECOVERY_ON_TIMER_EXPIRE     102
#define AST_CAUSE_MANDATORY_IE_LENGTH_ERROR    103
#define AST_CAUSE_PROTOCOL_ERROR               111
#define AST_CAUSE_INTERWORKING                 127

/* Special Asterisk aliases */
#define AST_CAUSE_BUSY          AST_CAUSE_USER_BUSY
#define AST_CAUSE_FAILURE       AST_CAUSE_NETWORK_OUT_OF_ORDER
#define AST_CAUSE_NORMAL        AST_CAUSE_NORMAL_CLEARING
#define AST_CAUSE_NOANSWER      AST_CAUSE_NO_ANSWER
#define AST_CAUSE_CONGESTION    AST_CAUSE_NORMAL_CIRCUIT_CONGESTION
#define AST_CAUSE_UNREGISTERED  AST_CAUSE_SUBSCRIBER_ABSENT
#define AST_CAUSE_NOTDEFINED    0
#define AST_CAUSE_NOSUCHDRIVER  AST_CAUSE_CHAN_NOT_IMPLEMENTED

References

<references/>