Raspberrypi: Difference between revisions

From 탱이의 잡동사니
Jump to navigation Jump to search
 
(15 intermediate revisions by the same user not shown)
Line 15: Line 15:
</pre>
</pre>


== wireless ==
== Configurations ==
=== raspi-config ===
라즈베리 파이의 기본 설정을 변경할 수 있는 매뉴이다.
 
=== Wireless ===
라즈베리 파이에서 무선랜 설정을 위해서는 크게 다음과 같은 과정을 거친다.
<pre>
- 무선랜 검색
- /etc/wpa_suuplicant/wpa_supplicant.conf 파일 설정
- /etc/network/interfaces 파일 설정
</pre>
 
무선랜 검색은 다음의 명령어로 할 수 있다.
<pre>
$ sudo iwlist wlan0 scan
</pre>
 
/etc/wpa_supplicant/wpa_supplicant.conf 파일 설정은 다음을 참고하자.
<pre>
country=GB
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
    ssid="test"
    psk="test_password"
}
</pre>
 
/etc/network/interfaces 파일 설정은 다음을 참고하자(static).
<pre>
iface wlan0 inet static
        address 192.168.118.12
        netmask 255.255.255.0
        gateway 192.168.118.1
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
</pre>
 
== Drivers ==
=== DWA-171A1 ===
DWA-171 은 기본적으로 라즈베리 파이용 모듈을 제공하지 않는다. DWA-171 을 라즈베리 파이에서 사용하기 위해서는 해당 모듈을 직접 컴파일해야 한다.<ref>http://digitalhacksblog.blogspot.dk/2015/12/it-worked-for-me-sort-of-raspberry-pi.html</ref>
 
* Used Raspbian Jessie image dated 11/21/2015
* Install below packages.
: $ apt-get install dkms build-essential bc gcc
* Downloaded and unzip the driver from abperiasamy/rtl8812AU_8821AU_linux GitHub.
: $ wget https://github.com/abperiasamy/rtl8812AU_8821AU_linux/archive/master.zip
* Download the appropriate kernel headers for your version of Raspbian.(linux-headers-4.1.13+_4.1.13+-2_armhf.deb)
: Download at here. (https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers-rpi/)
* Install the header.
: $ sudo dpkg –i <package name>.deb.
* Change the Makefile option.
: CONFIG_PLATFORM_I386_PC = n
: CONFIG_PLATFORM_ARM_RPI = y
* Install.
: $ sudo make clean
: $ sudo make
: $ sudo make install
* Load the module.
: $ sudo modprobe -a rtl8812au
 
== Applications ==
=== XBMC ===
설정 가이드
* http://www.rasplay.org/?p=9504
* http://sarangmarket.tistory.com/1388
 
m3u 파일 리스트
* http://i-ptv.blogspot.dk/2014/04/iptv-m3u-list.html
* http://bryan7.egloos.com/3119965
 
==== kodi-pvr ====
<pre>
<pre>
I recently purchased a D-Link DWA-171A1 Wireless AC Dual Band USB Adapter to use with a Raspberry PI 2 B after seeing a posting that stated that it worked out of the box. Well…
deb http://pipplware.pplware.pt/pipplware/dists/jessie/main/binary /


It didn’t work out of the box but I was able to get it to work by compiling the driver.  I used this code from GitHub on the Raspbian Jessie image dated 11/21/2015
Than add the key:


    Loaded the Raspbian Jessie image from here: https://www.raspberrypi.org/downloads/raspbian/ Linux raspberrypi (4.1.13-v7+)  to my SD Card.(linux-headers-4.1.13+_4.1.13+-2_armhf.deb)
Code:
    Added the following packages using apt-get: apt-get install dkms build-essential bc
wget -O - http://pipplware.pplware.pt/pipplware/key.asc | sudo apt-key add -
    Downloaded and unzip the driver from abperiasamy/rtl8812AU_8821AU_linux GitHub repository:  https://github.com/abperiasamy/rtl8812AU_8821AU_linux/archive/master.zip
    Download the appropriate kernel headers for your version of Raspbian.  I found the ones I needed here: https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers-rpi/.
    Install the headers using sudo dpkg –i <package name>.deb.
    cd to the directory you unziped the driver into.
    Using nano or some other editor update the Makefile:


    CONFIG_PLATFORM_I386_PC = n
And update and install Kodi or the PVRs:
    CONFIG_PLATFORM_ARM_RPI = y


    The using the following commands build and install the driver.
Code:
sudo apt-get update


    # sudo make clean
Code:
    # sudo make
sudo apt-get install kodi kodi-pvr*
    # sudo make install
</pre>
    # sudo modprobe -a 8812au


You should now see the DWA-171 as a wireless interface and should be able to configure it.
=== EmulationStation ===
* http://emulationstation.org/gettingstarted.html#install_rpi_standalone


=== OSMC===
* https://discourse.osmc.tv/t/howto-retrosmc-retrogaming-on-osmc/6671?u=mcobit


=== Docker ===
Docker install on raspberry pi.
라즈베리 파이에서도 docker 를 설치할 수 있다. 다음의 명령어를 입력하면 된다<ref>https://www.raspberrypi.org/blog/docker-comes-to-raspberry-pi/</ref>.
<pre>
$ curl -sSL https://get.docker.com | sh
</pre>
</pre>


Line 47: Line 120:
* https://raymii.org/s/blog/Broken_Corrupted_Raspberry_Pi_SD_Card.html - Broken Corrupted Raspberry Pi SD Card
* https://raymii.org/s/blog/Broken_Corrupted_Raspberry_Pi_SD_Card.html - Broken Corrupted Raspberry Pi SD Card
* https://www.raspberrypi.org/documentation/installation/installing-images/linux.md - Installing Operating System Images on Linux
* https://www.raspberrypi.org/documentation/installation/installing-images/linux.md - Installing Operating System Images on Linux
* https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md - SETTING WIFI UP VIA THE COMMAND LINE


== References ==
== References ==

Latest revision as of 19:28, 2 December 2017

Overview

Raspberry pi 정보 정리

Installation

공개된 Raspberry pi 설치 이미지는 이곳<ref>https://www.raspberrypi.org/downloads/</ref>에서 다운받을 수 있다.

이후, 다운받은 이미지를 dd 명령어를 이용하여 SD 카드로 복사하면 된다. 

$ wget https://downloads.raspberrypi.org/raspbian_latest

$ ls
2015-05-05-raspbian-wheezy.img

$ sudo dd bs=4M if=./2015-05-05-raspbian-wheezy.img of=/dev/mmcblk0

Configurations

raspi-config

라즈베리 파이의 기본 설정을 변경할 수 있는 매뉴이다.

Wireless

라즈베리 파이에서 무선랜 설정을 위해서는 크게 다음과 같은 과정을 거친다. 

- 무선랜 검색
- /etc/wpa_suuplicant/wpa_supplicant.conf 파일 설정
- /etc/network/interfaces 파일 설정

무선랜 검색은 다음의 명령어로 할 수 있다. 

$ sudo iwlist wlan0 scan

/etc/wpa_supplicant/wpa_supplicant.conf 파일 설정은 다음을 참고하자. 

country=GB
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
    ssid="test"
    psk="test_password"
}

/etc/network/interfaces 파일 설정은 다음을 참고하자(static). 

iface wlan0 inet static
        address 192.168.118.12
        netmask 255.255.255.0
        gateway 192.168.118.1
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

Drivers

DWA-171A1

DWA-171 은 기본적으로 라즈베리 파이용 모듈을 제공하지 않는다. DWA-171 을 라즈베리 파이에서 사용하기 위해서는 해당 모듈을 직접 컴파일해야 한다.<ref>http://digitalhacksblog.blogspot.dk/2015/12/it-worked-for-me-sort-of-raspberry-pi.html</ref>

  • Used Raspbian Jessie image dated 11/21/2015
  • Install below packages.
$ apt-get install dkms build-essential bc gcc
  • Downloaded and unzip the driver from abperiasamy/rtl8812AU_8821AU_linux GitHub.
$ wget https://github.com/abperiasamy/rtl8812AU_8821AU_linux/archive/master.zip
  • Download the appropriate kernel headers for your version of Raspbian.(linux-headers-4.1.13+_4.1.13+-2_armhf.deb)
Download at here. (https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers-rpi/)
  • Install the header.
$ sudo dpkg –i <package name>.deb.
  • Change the Makefile option.
CONFIG_PLATFORM_I386_PC = n
CONFIG_PLATFORM_ARM_RPI = y
  • Install.
$ sudo make clean
$ sudo make
$ sudo make install
  • Load the module.
$ sudo modprobe -a rtl8812au

Applications

XBMC

설정 가이드

m3u 파일 리스트

kodi-pvr

deb http://pipplware.pplware.pt/pipplware/dists/jessie/main/binary /

Than add the key:

Code:
wget -O - http://pipplware.pplware.pt/pipplware/key.asc | sudo apt-key add -

And update and install Kodi or the PVRs:

Code:
sudo apt-get update

Code:
sudo apt-get install kodi kodi-pvr*

EmulationStation

OSMC

Docker

Docker install on raspberry pi.

라즈베리 파이에서도 docker 를 설치할 수 있다. 다음의 명령어를 입력하면 된다<ref>https://www.raspberrypi.org/blog/docker-comes-to-raspberry-pi/</ref>. 

$ curl -sSL https://get.docker.com | sh

See also

References

<references />

Retrieved from "http://wiki.pchero21.com/index.php?title=Raspberrypi&oldid=2808"